i-Clickr PowerPoint Remote


i-Clickr works by establishing connection, via Wi-Fi or Bluetooth, between your host computer (Windows or Mac) from which your presentation will run, and your android device that will serve as your remote clicker. 

How to Navigate Your Slides

Once the connection is made, select your PowerPoint presentation on the host computer, and set the presentation alarm on your Android device to start your presentation. 

Swipe your finger left-to-right or right-to-left over the screen to move to the next or previous slide. 
To switch between slide view and notes view, tab on the Notes button in the middle.


How to Resolve Wi-Fi Connection Issues

If you have problem making i-Clickr on your Android device connect to your PC/Mac, please check the following:

1.  Make sure i-Clickr is running on your host PC/Mac

2.  If you are using a shared Wi-Fi connection, make sure the device and PC/Mac are connected to your Wi-Fi network.

3. Make sure your Windows/Mac firewall allow i-Clickr program to go through.  i-Clickr uses TCP port 1725.


If above instruction does not resolve your connection issue, please contact us at support@senstic.com



Post your questions/suggestions on our Support Forum.